WTN4 Speech Chip

WTN4 Speech Chip

WTN4 series of voice chips include WTN4045, WTN4065, WTN4105 (if it is 6KHz sample rate, their voice length is 45s, 65s, 105s)

Products Detail

Description of this WTN4 Speech Chip
 
WTN4 series of voice chips include WTN4045, WTN4065, WTN4105 (if it is 6KHz sample rate, their voice length is 45s, 65s, 105s).
WTN4 is a multi-functional single chip, CMOS speech synthesis 4-bit MCU. Provide one-channel audio output, high-quality PWM to drive speaker. Speech synthesis adopts ADPCM, max sample rate up to 44.1KHz.
Precise +/-1% internal oscillation, no need of external oscillation, low standby power consumption. 
 
Parameters of this WTN4 Speech Chip
 
1、Working voltage: 2.4V~5.5V.
2、Standby mode, power saving, quiescent current less than 1uA.
3、PWM audio output, can directly drive speaker and buzzer.
4、High-quality ADPCM speech synthesis, can adjust sample bits to improve sound quality.
5、Precise +/-1% internal oscillation, built-in low voltage reset (LVR=1.8V) and watchdog.
6、Support BUSY output .
7、Have one-line serial port control mode, two-line serial port control, pulse control mode.
  
Pictures of this WTN4 Speech Chip
 
Pin Description:
 
 
 
 
Advantage of this WTN4 Speech Chip
 
Note:
Supply voltage and control mode have been set when programming, cannot be changed. So please tell us your application requirements when ordering.
Chip voltage setting determines the opening and closing of internal LDO. Pay attention to voltage setting, that must be matched with supply voltage and circuit connection. Otherwise, it will cause chip damage or not working. Supply voltage as shown below: 
 
Looking forward to your inquiry for this WTN4 Speech Chip

Tags

Leave your messages:

Send Inquiry Now

Related Products

Send Inquiry Now